20' x 20' Walk-In Cooler Model #AMC 2020
Model #AMC 2020 Walk-In Mortuary Cooler
by American Mortuary Coolers
Please make note: a forklift is required for delivery (provided by the customer*) no exceptions to this policy. We are not responsible for any damage incurred during offload by your forkilift .
External (O.D.): 20' 0" x 20' 0" x 7' 6 1/2" - w x d x h
Internal (I.D.): 19' 5 1/4" x 19' 5 1/4" x 7' 3 1/8" - w x d x h
Finishes Walls: Acrylume/Embossed - 26 Ga. - interior & exterior (silver finish)
Ceilings: Acrylume/Embossed - 26 Ga. - interior Galvanized/Embossed - 26 Ga. - exterior Panel Thickness Walls: 3.375" UL Listed Class 1 Foam Ceilings: 3.375" UL Listed Class 1 Foam
Not included. Set-up on your existing concrete surface. If placing cooler on a 2nd floor a floor is required.
Flexible NSF vinyl gaskets shall be adhesive backed and installed on the exterior edge of the rail “tongue”. Gaskets shall be impervious to stains, grease, oils, and mildew.
CFC free urethane insulation shall have 97% closed cell structure. Class 1 rated urethane foam to have thermal conductivity (K-Factor) of not less than .120 BTU/hr per degree F/ inch and overall heat transfer coefficient (U-Factor) of not more than .030 BTU/hr sq ft. All foam panels to be supplied with Class 1 fire hazard insulation certified by Underwriters Laboratories as having a flame spread of 25 or less and smoke generation of 450 or less when tested in accordance with ASTM-E-84.
Door Size Standard: 36" x 81" (call for other sizes or multiple doors)
Choose door hinge, and location on the drop down menu.***
Electrical Specifications (Condensor & Evaporator)
Extras: Liquid line, Filter, Drier, Sight glass installed
Electrical: 208-230/1/60, RLA 11.2, MOPD 25, MCA 15
Conditions: BTUH: 17490 Room Temp: 35°F Ambient: 95°F
Warranty: Compressor-motor warranty extended to 5-years, parts only, no labor
Description: Air defrost Low profile coil (unit cooler) 115/1/60 with EC fan motors coil
Electrical: 115/1/60, Fan amps 3.8
Extras: TXV, Liquid line, Solenoid valve, T-stat (Mechanical)
All American Mortuary walk-ins are test assembled in our plant before shipment to assure that all the panels and parts fit nicely together and meet our stringent quality standards. We provide a layout drawing with each panel labeled and a manual with pictures to assist in easy assembly. The walk in will go together better than any other walk in on the market. Most installation problems, if any, have to do with site preparation. Taking your time and following instructions any person should be able to install our walk in. If you have additional questions please call us at 1-888-792-9315.
Do not be fooled. All of our Walk-in boxes are manufactured using 100% U.S. made materials. We offer references in almost every state.
Drawings and Sketches are copyrighted, may be used only with permission.